CHAPTER 1
INTRODUCTION
Entire Contents Copyright 2004 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from APSI.
APS-3000P Series 1 - 5 OM-001-03000-00P-03.9
Preparation for Installation
Important Information and Instructions
This section contains instructions for unpacking, inspecting, preparing and storing your
APS-3000P Power Converter.
Unpacking and Inspection
APS-3000P Power Converters are well packed to provide protection in the normal
shipping environment. If the shipping box appears damaged upon receiving, please
inspect the power source for scratches or damage. If the product has been damaged,
please alert the freight company and contact APS or the distributor. Please keep the
original box and packing to assist in determining how the damage occurred.
What to do if Damage has Occurred
If your APS-3000P Power Converter was damaged in shipment, you must file a
damage claim with the freight company. Do not return the product before contacting
APS to receive a Returned Merchandise Authorization (RMA) number.
Please retain all the original packing materials. If the APS-3000P Power Converter
must be sent back for repair, use the original packing materials for packing.
To Next Page
Loading...