APS APS-3000P Series - Key APS-3000 P Specifications

CHAPTER 2
TECHNICAL SPECIFICATIONS
Entire Contents Copyright  2004 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from APSI.
APS-3000P Series 2 - 2 OM-001-03000-00P-03.9
Introduction
APS-3000P Power Converters are rugged versatile workhorses. The intended location
for APS-3000P units is the test floor, not a laboratory workbench. The smallest unit,
the APS-3003P, weights 305 lbs. The largest unit, the APS-3180P, weighs around 4000
lbs. Users can select from several modes of operation:
 full-manual operation
 manually programmed operation
 remote PLC operation
 remotely programmed serial data operation (RS-232 option)
 remotely programmed parallel data operation (GPIB option)
 combinations of these operational modes
In keeping with their workhorse nature, all APS-3000P units feature a 200% start-up
surge-current capability. The ability to source initial surge currents prevents the
programmed over-current protection from disabling a test.
APS-3000P Specifications
The following five tables and surge current graph provide detailed information about
the entire family of APS-3000P Series of power converters.
 Input Electrical Specifications
 Output Electrical Specifications
 Displays and Controls
 Mechanical Specifications
 Environmental Specifications
 Surge-Current Rating Graph