APS APS-3000P Series - System Parameter Table

CHAPTER 4
OPERATING INSTRUCTIONS
Entire Contents Copyright  2004 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from APSI.
APS-3000P Series 4 - 10 OM-001-03000-00P-03.9
System Parameter Table
FREQUENCY
DISPLAY
VOLTAGE
DISPLAY
CURRENT
DISPLAY
DESCRIPTION


External Control / PLC Remote
ON/OFF






Optional GPIB Address



Auto Voltage adjust function (AGC)
enable / disable. When ON, output
voltage regulation is improved.






Power-Up output status





S


S
Testing time unit selection









Auto Loop cycle ratio selection
x1, x10, x100









Maximum frequency setting limit



Minimum frequency setting limit



Maximum voltage setting limit



Minimum voltage setting limit



Constant Current output mode, ON / OFF


