Aqua-Base ESW Series - A - THE WATERMAKER; B - THE LP PUMP; C - STARTING THE WATERMAKER; D - WATERMAKER MAINTENANCE

J:\Etude-3d\Aquaset\0-DOSSIER TECHNIQUES\1-sw-plaisance\ESW\00-ESW 0707\09- Manuels Utilisateur\DOC UTILISATEUR ESW FRUKES 2009-10-C.doc VERSION 2009-10-C FR/UK/ES Page 19/58
SUMMARY
A – THE WATERMAKER 20
1 – PRESENTATION 20
2 – CHARACTERISTICS 21
3 – DESCRIPTION 21
3.1 – Water system (See Fig.2 and Fig.3 next page) 21
3.2 – Flow chart 22
3.3 – Installation on board 22
3.4 – Electric drawing and control panel 23
3.5 – Remote control (EXTRA) 24
4 – INSTALLATION OF WATERMAKER 25
4.1 – Preparation 25
4.2 – Placing the unit 25
4.3 – Electrical connection 25
4.4 – Assembling the fittings and pipes 26
4.5 – Semi-automatic rinsing 27
B – THE LP PUMP 28
1 – LP PUMP INSTALLATION 28
2 – LP PUMP - TYPE 29
3 – PUMP START-UP 29
3.1 – Using the pump for the first time, or if it is unprimed 29
3.2 – Starting-up a primed pump 29
3.3 – Maintenance of the pump 29
C – STARTING THE WATERMAKER 30
1 – FIRST START-UP 30
2 – NORMAL STARTING 30
3 – STOPPING THE WATERMAKER 31
3.1 – Simple stop (Stop for 3 days maximum) 31
3.2 – Stopping with fresh water flush (Stop between 3 days and 2 weeks) 31
3.3 – Stopping with preservation (Stop of more than 2 weeks) 31
3.4 – Stopping with wintering procedure (LONG TIME STOP) 32
D – WATERMAKER MAINTENANCE 33
1 – MAINTENANCE SCHEDULE 33
2 – SPARE PARTS FOR ONE YEAR 33
3 – REPLACEMENT OF THE FILTER CARTRIDGE (Unit stopped) 33
4 – CLEANING THE SALINITY CELL 33
5 – CLEANING OF THE MEMBRANE 34
E – ANNEXES 51
RAPPORT DE MISE EN SERVICE / START-UP REPORT / INFORME DE PUESTA EN SERVICIO 51
PIECES DE RECHANGE / SPARE PARTS / PIEZAS DE RECAMBIOS 53
DIMENSIONS / DIMENSIONS / DIMENSIONES 54
DIMENSIONS / DIMENSIONS / DIMENSIONES 55
INSTALLATION A BORD / ON BOARD INSTALLATION LAYOUT / INSTALACIÓN 56
SCHEMAS ELECTRIQUE / ELECTRIC DRAWINGS / ESQUEMAS ELECTRICOS 57
STOCKAGE POMPE / PRESERVATION PUMP 58
LE SERVICE AQUA-BASE 59