ARB 35L - Page 46

Revision Date – 22/12/2014 page 45
Remove the AC power socket cover.
Remove the decal label for the power panel.
Remove the 12/24V DC socket. Withdraw the
socket (complete with leads) through the hole in
the rear cover as shown.
Remove 100-240V AC socket. Withdraw the
socket (complete with leads) through the hole in
the rear cover as shown.
HINT: Use a flat blade screw driver to depress
the tabs on the back of the socket.
Discard old rear cover.
AC power
socket cover
DC socket
AC socket
Power panel with
decal removed