Arcam HDA PA720 - Bill of Materials

EN
EN-13
HF
LF
Connecting Sources and Loudspeakers
RS232 NET
TRIGGER OUT
(12V 100mA)
TRIGGER IN
POWER INLET
110-120V/220-240V~
50/60Hz 1.5kW MAX
USB
5V
100mA
SWITCH POSITIONS
115 = 110 - 120V ~
230 = 220 - 240V ~
SUPPLY
VOLTAGE
RCA
XLR
INPUT
IN7
OUT7
IN6
OUT6
IN5
OUT5
IN4
OUT4
IN3
OUT3
IN2
OUT2
IN1
OUT1
IN7 IN6 IN5 IN4 IN3 IN2 IN1
CH4 CH3 CH2 CH1
4-16 OHMSCLASS 2 WIRING
CH5CH6CH7
HF
LF
HF
LF
Notes On Making Speaker Connections
 Do not make any connections to any amplifier while it is switched on. We recommend
that your amplifier is completely disconnected from the mains supply before starting.
 Before switching your amplifier on for the first time after connecting to speakers, please
check all connections thoroughly. Ensure that bare wires or cables are not touching
each other or the amplifier’s chassis (which could cause short circuits), and that you
have connected positive (+) to positive and negative (–) to negative. Be sure to check
the wiring for both the amplifier and the speaker.
 After making connections: switch the amplifier on then gradually increase the volume
to the required listening level.
 If you are unsure as to how your system should be connected, please contact your
Arcam dealer who will be happy to help you.
115 230
SWITCH POSITIONS
115 = 110 - 115V~
230 = 220 - 240V~
HEIGHT1 HEIGHT2
SUB 2
L
R
PREAMP OUT
FL C SL SBL
FR SUB 1 SR SBR
BD CD
PVRSAT
DIGITAL AUDIO
STB AV
OUTPUT 2
OUTPUT 1
ARC
ZONE 2
OUT
PVR
VCR
BD
SAT
AV
GAME
STB/MHL
HDMI
L
R
Z2 OUT
STB
GAME
AV
BD
PVR
CD
ANALOGUE AUDIO
ETHERNET
USB 5V
1A
FM/DAB
DC 6V
1.2A MAX
RS232
TRIG Z1 Z1 IR
TRIG Z2 Z2 IR
23425
POWER INLET
~50/60Hz 50W MAX
BALANCED OUTPUTS
FL C SL SBL HEIGHT 1 L HEIGHT 2 L
FR SUB 1 SR SBR HEIGHT 1 R HEIGHT 2 R
AV860
HF
LF
PREAMP OUT
FL C SL SBL
FR
SUB 1
SR SBR
PA720
Connect the RED positive speaker terminal labelled
CH1 to CH7+ to the positive terminal of your speaker.
Similarly, connect the BLACK negative speaker terminal
of the same channel to the negative terminal of your
speaker.
Repeat this process for the other speakers, using the
same respective input and speaker terminals for each
channel.
NOTE: All the channels are identical so there is no
requirement to connect specific AVR output channels
to specific amplifier channels.
HF
LF
HF
LF
HF
LF
BALANCED OUTPUTS
FL C SL SBL
HEIGHT 1 L
HEIGHT 2 L
FR
SUB 1
SR SBR
HEIGHT 1 R
HEIGHT 2 R
RCA
XLR
INPUT
Note: Single channel shown for
clarity
Note: Unit should be
connected via RCA
or XLR. Both versions
shown for illustrative
purposes only.
PA720
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 1300_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 13 29/01/2020 13:11:3429/01/2020 13:11:34