Arcam HDA PA720 - Specifications; Pa720

EN
EN-19
Specications
Continuous power output at 0.2% THD per channel
Seven channels driven, 4Ω / 8Ω, 1kHz 140W / 100W
Five channels driven, 4Ω / 8Ω, 1kHz 175W / 110W
Two channels driven, 4Ω / 8Ω, 1kHz 225W / 140W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.002%
Inputs
RCA Type XLR Type
Input sensitivity 100W / 8Ω 800mV RMS 1.6V RMS
Signal/Noise ratio (A-wtd) 100W / 8Ω 112dB
Input impedance 10kΩ
Frequency response 20 - 20kHz +/-0.05dB
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Maximum power consumption 1.5kW
Low power standby consumption 0.5W
Network standby consumption 2W
Dimensions W x H x D (including feet,
control knob and speaker terminals)
433 x 425 x 177mm
Weight (net) 18kg
Weight (gross) 19.7kg
All specication values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specications are subject to change without notice.
E&OE.
PA720
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 1900_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 19 29/01/2020 13:11:3629/01/2020 13:11:36