EN-20
Continuous power output at 0.2% THD per channel
Two channels driven, 4Ω / 8Ω, 1kHz 380W / 225W
One channel driven,
8Ω bridged mode, 1kHz
790W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
RCA Type XLR Type
31dB 25dB 31dB 25dB
Input sensitivity 200W / 8Ω 1.15V RMS 2.3V RMS 2.3V RMS 4.6V RMS
Signal/Noise ratio (A-wtd) 10W / 8Ω 110dB 114dB 110dB 114dB
Input impedance 10kΩ
Frequency response 20 - 20kHz +/-0.05dB
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Maximum power consumption 1.5kW
Low power standby consumption 0.5W
Network standby consumption 2W
Dimensions W x H x D (including feet,
control knob and speaker terminals)
433 x 425 x 177mm
Weight (net) 18kg
Weight (gross) 19.7kg
All specication values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specications are subject to change without notice.
E&OE.
PA240
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 2000_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 20 29/01/2020 13:11:3729/01/2020 13:11:37
To Next Page
Loading...
