6 Local Control Panel
C232-302-401/402/403/404-603 / C232/EN M/A23 6-1
6 Local Control Panel
Local control panel
The switchgear units of the bay can be controlled from the local control panel. In
addition, all data required for operation of the unit C232 are entered here, and the data
important for system management are read out here as well. The following tasks can be
handled from the local control panel:
Controlling switchgear units
Readout and modification of settings
Readout of cyclically updated measured operating data and logic state signals
Readout of operating data logs and of monitoring signal logs
Readout of event logs after short circuits in the power system
Device resetting and triggering of additional control functions used in testing and
commissioning
Control is also possible through the PC interface. This requires a suitable PC and the
operating program S&R-103 for Windows.
6.1 Display and Keypad
Control and display
elements
The local control panel includes an LCD display with a resolution of 128 x 128 pixels
(divided semigraphically into 16 lines of 21 characters each), twelve function keys and
17 LED indicators.
To Next Page
Loading...