Chapter 6: Using OrionNET Software
Argus TubeSpec User Guide NOV CTES 73
Working with Chart-legend Data
Located in the lower right-hand corner of the TubeSpec chart control, the chart-legend data area is used
primarily (as its name implies) as a legend for the chart. It also reveals the data associated with the
available (color-coded) channels.
By default, the chart legend displays current values reported by the TubeSpec system.
As described in Reviewing Data
, historical data is available for review in the chart-legend data area
when the user activates the cursor and its associated vertical line in the chart-plotting area of the chart
control.
In the chart-legend display area, channels that have alarm(s) and warning(s) are outlined in red (alarm)
or yellow (warning). See Monitoring Alarms and Warnings
for additional information.
Monitoring Alarms and Warnings
The chart control can be used similarly to other OrionNET controls to monitor alarms and warnings
associated with the channel values they display.
To Next Page
Loading...
Need help?
General