Ariston CLAS - Primary Exchanger

Manuale didattico CLAS
Pag. 33 di 71
Manuale Didattico – ACO
4.10 PRIMARY EXCHANGER
The body of the exchanger is made of copper and with an anti corrosion silicone treatment, it transmits heat
of the combustion products to the primary circuit water.
A thermostat 102°C+\ - 4°C with automatic reset controls overheating.
Model
Nr. of flaps
Dimensions
24 CF
82
260 x 180 mm
24 FF (to February 2008)
91
260 x 180 mm
24 FF (from March 2008)
78
220 x 180 mm
28 FF
91
260 x 180 mm
O-ring seal
Over heating
thermostat