Artis EXCITE UNITY - Exercise Configuration Settings; Maximum Exercise Duration; Maximum Pause Time; Cool Down Time Setting

55
Unity
Conguration menu
Exercise settings
Select the maximum duration of the exercise.
With this function all exercises are automatically interrupted when they reach the set time; for example, if a max time of 30 minutes has been set and an
exercise is started without any setting with the Start key, the workout ends after 30 minutes.
The maximum duration of the exercise is set in minutes.
This does not apply to exercises memorised on the TGS key.
Select the maximum pause time.
To set the maximum time of a pause during an exercise. After the time set here, the pause ends and the exercise is terminated.
The maximum pause time is set in seconds.
Select the cool down time.
To select the cool down time, from 5 to 180 seconds.
Select the Warm Up time.
It is present in Top Excite, to modify the Warm Up exercise duration up to a maximum of 10 minutes.
The exercise duration is set in seconds.
Select the speed for user present
To set the speed at which the user present function starts. It is present in Run and in Jog.
Enable or disable gradient.
To enable or disable the gradient of the treadmill belt. It is present in Run and in Jog.
Select the LED for completed exercise time
To set the number of minutes before the end of the exercise you must turn on the led located at the end of the side grip, to indicate that the product will soon
be available: in motion light. It is present in Run and in Jog.