Artis EXCITE UNITY - Smart Fitness Assessment; Smart Test Methodology; Initiating the Smart Test; Ending the Smart Test

23
Unity
Smart test
The smart test is based on a person's training level; it calculates the maximum V02 according to the workload at which the user perceives the eort as being
a “very hard eort”.
To do the test, the user must enter his/her training level, i.e. how trained the user feels and his/her weight.
During the test, the intensity gradually increases.
The test ends when the Stop key is pressed. The Stop key should be pressed when the user perceives the eort as being hard on a scale of 9 intensities:
- no eort
- very very weak
- very weak
- weak
- moderate eort
- somewhat strong
- strong
- very eort
- very very strong
If the user does not have to work hard, the test must be repeated, entering a higher training level.
The smart test is available for Bike, Run and Recline products of the Artis Line.