Arturia PolyBrute - Morph Utilities

10.5.2. Morph utilities
10.5.2.1. Pick B
This option allows you to copy sound A or B from any preset into the edit buffer of the patch
you're creating. After selecting the Pick B option, use [Assign 1-8] and the Matrix buttons to
select the source patch for sound B.
After selecting the source patch, the display shows that sound A from the selected patch has
been copied into sound B of the patch being edited.
Push the Matrix button for the source patch again and the display changes to show that
sound B from the selected patch has been copied into sound B of the patch being edited.
10.5.2.2. Copy A->B
When creating a patch you might want to morph between two sounds that are similar in
some ways and drastically different in only a few ways. Use this option to copy sound A
into sound B, and then edit each sound as you see fit.
10.5.2.3. Current to A
If the current position of the Morph knob gives you exactly the sound you want for sound A,
you can transfer that to sound A and then focus on sound B.
10.5.2.4. Current to B
Likewise, if the current position of the Morph knob gives you exactly the sound you want for
sound B, you can transfer that to sound B and then focus on sound A.
10.5.2.5. Swap A/B
Here's a use case for this feature: Let's say you like what the Pick B function brought into
the patch but you're not so thrilled about sound A now. Swap A and B; now your sound B
resides in sound A. Now you can search for another complementary sound using the Pick B
function again.
76 Arturia - User Manual PolyBrute - Morph Mode