12.2.1.5. Sub Level Mode
• Crossfade is the behaviour described in the Sub section.
• Level is a mode where only the sub level is affected by the knob ; the VCO 2
waveform mix remains unaffected
12.2.1.6. Morph pitch quantize
his affects how the VCO 1 & 2 Tune parameters change between their settings for sounds
A and B as the Morph knob is turned. Note that when Vco2 Tune range is inferior than 12
semitones, it will always morph continuously
• Continuous: Smooth transition of VCO 1 & 2 Tune between sounds A and B.
• Chromatic: VCO 1 & 2 Tune changes in semitones between sounds A and B.
• A | B: When the Morph knob is between A and halfway, VCO 1 gives the A setting.
When the knob is between halfway and B, VCO 1 gives the B setting.
• Octaves: VCO 1 jumps in octaves between sounds A and B.
• Octaves Fifths: VCO 1 jumps in fifths and octaves between sounds A and B.
• Octaves Fourths: VCO Tune parameter jumps in fourths and octaves between
souns A and B.
• Major Triad: VCO 1 transitions between sounds A and B with a major triad (root,
major 3rd, 5th, octave)
• Minor Triad: VCO 1 transitions between sounds A and B with a minor triad (root,
minor 3rd, 5th, octave)
84 Arturia - User Manual PolyBrute - Settings
To Next Page
Loading...
