ASCOM D81 Configuration Manual

TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
14
4. Maintenance
The device whose license that has been moved has now become a d81 Messenger. The
device that received the license is still shown as a d81 Messenger. Select this device and do
the following:
5 In the Licenses menu, select "Refresh" to complete the transfer of the license. The
device is now a d81 Protector.
See also 4.6 Replacement Procedure Choice Guide on page 14 for information on how to
move user parameters and contacts to another handset.
4.5 Perform a Factory Reset
When a factory reset is done on a handset, all configuration settings are restored to their
default values and PBX subscriptions and all data are removed. This includes contacts,
messages etc. The software is left intact.
Factory Reset using PDM/Device Manager
1 In PDM or Device Manager, click the Device tab and mark the handset to be factory
reset. Note that the handset must be online.
2 In the Device menu, select "Factory reset". Alternatively, right-click the handset and
select "Factory reset".
3A Reset devices dialog appears, click "Yes". The handset is restarted.
Factory Reset using Handset
A factory reset can be performed from the handset Admin menu.
1 To activate the Admin Menu, enter the Call time screen and press > * < < * <.
2 Select "Factory Reset".
3A Reset portable? dialogue appears, press "Yes". The handset is restarted.
4.6 Replacement Procedure Choice Guide
Depending on situation, two different replacement procedures can be chosen; replacement
via PDM/Device Manager and Easy Replacement. Use the following list as a guide to choose
which procedure to use.
• If a handset needs to be replaced due to for example a broken display, see the handset’s
User Manual.
• If the electrical connection is damaged, it might not be possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via PDM/
Device Manager, see
4.7 Replacement of Handset with Device Manager on page 15 or 4.8
Replacement of the Handset with PDM on page 16.
• If two handsets and their settings are switched between two users, follow 4.7
Replacement of Handset with Device Manager on page 15 or 4.8 Replacement of the
Handset with PDM on page 16.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English