ASCOM D81 Configuration Manual

TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
38
5. Handset Configuration
• Alarm type for long press
Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used. If Not used is
selected, the call after alarm number can still be dialled without sending an alarm, see
5.27.1 Call Predefined Number Without Sending Alarm on page 38.
• Text indication for alarm on long press
• Duration for long press
• Alarm type for multiple press
Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used. If Not used is
selected, the call after alarm number can still be dialled without sending an alarm, see
5.27.1 Call Predefined Number Without Sending Alarm on page 38.
• Text indication for alarm on multiple press
• Define multiple press
•ALS
1,2
• Silent alarm
If enabled, the indication of an alarm has been sent and received is disabled.
If the parameters "ALS" and "Silent alarm" are set, no ALS is triggered after an alarm has
been sent.
• Automatic call after alarm mode
The call can be established in the following modes;
- Normal: the call is established as an ordinary call.
- Loudspeaking: the loudspeaker on the backside of the handset is turned on.
- Monitoring: a one-way speech channel is established, that is, the called part can only
listen to an conversation.
See also 5.26 Common Alarm Settings on page 37 for additional parameter settings.
Information about the handset’s location can also be sent along with an alarm, see 5.21
Base Station Location on page 32 and 5.22 DECT Location and LF Location on page 33.
5.27.1 Call Predefined Number Without Sending Alarm
The push-button can be configured to dial the automatic call after alarm number without
sending an alarm. The following example describes how to configure the push-button
(alarm on long press). The corresponding settings can also be configured for the push-
button when it is pressed twice or more (alarm on multiple press).
Example of configuration:
1 Select Alarm > Common
2In the Number for automatic call after alarm field, enter the number to be dialed.
3 Select Alarm > Alarm on long press
4In the Alarm type for long press drop-down list, select "Not used".
5In the Mode for automatic call after alarm drop-down list, select one of the following:
- Normal: the call is established as an ordinary call.
- Loudspeaking: the loudspeaker on the backside of the handset is turned on.
- Monitoring: a one-way speech channel is established, that is, the called part can only
listen to an conversation.
1. If the parameters "ALS" and "Silent alarm" are set, no ALS is triggered after an alarm has been sent.
2. The ALS is not activated if an automatic call is established after an alarm has been sent.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English