ASCOM D81 Configuration Manual

TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
24
5. Handset Configuration
5.9.2 Normally Displayed
These functions in this are normally displayed during calls. The administrator can add or
remove a function from the In Call menu by selecting "Edit parameters" in the PDM/Device
Manager or by opening and editing the template file from the PDM "Templates" tab:
To locate the function and configure the associated parameter:
1 Navigate to System > System X > PBX Settings > In call functionality > <parameter
name> <value>
2 To remove the function from the In Call menu, delete the value of the parameter
associated with the function. To add a function that is not displayed, set the
parameter value associated with the function.
5.9.3 Advanced Functions
The administrator can configure the handset to allow access to the following advanced
functions during a call. These are functions intended for an advanced user such as an
installer using the handset to measure RF link and system parameters as part of a
troubleshooting or site surveying procedure.
These functions can be added to the handset In Call menu by activating the Admin Menu as
described in 6.1.1 Activating the Admin Menu on page 62.
Function Description
New call Start a new call during a conversation
End current call End a call from the In Call menu
Switch call Switch between calls
Transfer call Transfer a call
Conference call Make a conference call
Transfer to new Performs an unattended transfer of the inbound call to another party
Callback May be requested if the user is engaged. When the user becomes
available, the calling party receives a callback from the PBX
Call waiting May be requested if the user is already on a call. Notifies the user
that a call is waiting
Contacts Open the handset contacts list
DTMF When requested, enables the handset to send DTMF
Decline call waiting Determines what is sent to PBX when user declines an incoming call
during the current call
Function Description
DECT Info Shows link and DECT system information
Location Info Shows location IDs and RSSI values received from location devices if
the handset has the appropriate DECT Location license and a DECT
location service is running

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English