ASCOM D81 Configuration Manual

TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
48
5. Handset Configuration
Example 4
This example describes the message handling with
the following message settings:
• TTP= No prioritization
• TTR= Close manually
Tip:
It is recommended to use this settings if messages regardless of priority is to be read in
chronological order, that is, the newest message is displayed first.
Figure 9. Display messages in order regardless of priority
The user closes
the message
Prio 2
14:02
Prio 1
13:59
New messages
Prio 1
13:59
Prio 2
14:02
Prio 1
13:59
Prio 1
13:59
M
essage queue
Prio 2
14:02
Messaging Inbox
In figure 9, a message with priority 1 is received at 13:59. Another message with priority 2
is received at 14:02 and is displayed. The message with priority 1 is put in the message
queue. The user needs to close the current message (priority 2) to show the message
(priority 1) in the queue. When closing the message (priority 2) it is indicated as a read
message in the Messaging Inbox.
5.31.3 Broadcast and Multicast Messaging
This feature is supported by the handset, but no parame
ter settings are required.
5.32 Message Templates
Handsets can be configured with predefined messages using the message template
function. Provided that both parties are connected via an IP-DECT system, a predefined
message can be used in the following ways:
• The user can decline the call but still acknowledge the rec
eipt of the call by selecting a
predefined message and sending it to the caller
• The user replies to an incoming text message by select
ing a predefined message and
sending it to the message sender
• The user can construct a text message
from a predefined message.
For additional information about how the message tem
plate function is used, see the User
Guide.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English