TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
44
5. Handset Configuration
Settings > Display
•Rotate display text
Determines if incoming messages are displayed upside down. This can be useful if the
user we
ars the handset in a belt and wants to read the message without rotating the
handset. When pressing any key, the messages are displayed in the normal way. NOTE:
This setting also affects how incoming calls are displayed.
5.31.1 Configure Message Alerts with Beep Codes
The handset can map beep codes sent from a system
or an application to different message
alerts. There are several ways to threat the beep codes:
Beeps according to beep code
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 6 1 - 5, and 10 beeps
Beep code 7 Siren
1 Select Settings > Sound and Alert.
2In the Message alert drop-
down list, select "Beeps according to beep code".
High beeps according to beep code.
The handset plays the m
essage alerts that are mapped to beep codes but with a higher
pitch.
1 Select Settings > Sound and Alert.
2In the Message alert drop-d
own list, select "High beeps according to beep code".
Enhanced beeps according to beep code.
The handset play
s extended message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2In the Message alert drop-d
own list, select “Enhanced beeps according to beep code”
Beep code sent from a system/application The handset plays:
Beep code
0 No message alert is played
Beep codes 1- 6 1 - 5, and 10 beeps
Beep code 7 Siren
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1 -3 1 - 3 beeps
Beep code 4 3 tones chime
Beep code 5 10 beeps
Beep code 6 Alarm sweep
Beep code 7 Siren
To Next Page
Loading...
Need help?
General
