TD 92674EN
29 April 2015 / Ver. I
Configuration Manual
Ascom d81 DECT Handset
57
5. Handset Configuration
To configure the handset to play a sound when a system profile is activated or deactivated,
perform the following steps:
1 Select "System profiles".
2 From the "System Profile X" list select the system profile where the audible alert is to
be applied.
3 Set the "Activation and deactivation sound" parameter to the required customized
sound.
5.43 Shortcuts
One click access to predefined functions can be configured for the Soft keys, Hot keys and
Navigation keys. For example the soft key can be defined to make a call by selecting the
Phone call function. When configuring the Phone call function, the following values can be
entered: Digits 0-9, #, *, P – pause, H – hook, U – the handset prompts the user to enter
numerical characters before establishing a call (procedure call).
Shortcuts are configured via parameters in the "Shortcuts" folder.
Note: When programming Soft keys both name and function must be set.
Note: A hot key configured to the Data Send service is also available during the call.
Tip: Shortcuts can also be configured via the handset menu. See the handset’s User Manual.
5.43.1 Restricting Access to Shortcuts
For some application areas, it may be a requirement that the user is prevented from defining
shortcuts to predefined functions via the handset Shortcuts menu. Setting a shortcut to
"Read only" via the PDM/Device Manager enforces this restriction. To access the parameters
associated with shortcuts, perform the following steps:
1 Select Shortcuts.
2 Select the required shortcut parameter:
Hot keys 0, 2 through 9 and "Hook Off"
Soft Keys "Left", "Middle" and "Right"
Navigation keys "Up", "Down", "Left", "Right" and "OK"
3 Select the "Read Only" attribute for the selected parameter and from the drop-down
menu select:
• False - Retain the default, that is, the selected shortcut remains configurable from
the Handset Shortcuts menu
• True - The shortcut is set read only. The end user is able to select the shortcuts
menu and individual shortcut keys from that menu but is unable to assign a
function to the selected key.
To Next Page
Loading...
Need help?
General
