ascon S2 Series User Manual

Chapter 2 - Installation
7
2-2-4 Connector “E” connections
The “E” terminal block allows the connection of 6 Analogue Inputs, 2 optional Ana-
logue Inputs and 4 Analogue Outputs
.
The terminals are positioned as follows:
1...6 + 6 configurable analogue (linear) input plus (+) poles. These inputs can
be configured as mA or V. The minus (-) poles are on connector “
F ”;
7...10 A...B 2 optional universal/high level analogue (linear) inputs (No. 7, 8) (see
the “
MP-01 Installation Manual ” for details). The number (0... 2) and
type of input can be identified with the order code. The other terminals
of these 2 inputs are on connector “F”;
11...14 +
4 optional analogue output plus (+) poles. The number of output (0... 4)
is specified in the order code, the type of output is set during the CPU
setup phase (see the “
MP-01 Installation Manual ” for details). The
minus (-) poles are on connector “
F ”.
2-2-5 Connector “F” connections
The connector labelled “F” has 14 terminals:
1...6 -
6 configurable analogue (linear) input minus (-) poles;
7...10 P...b 2 optional universal/high level analogue (linear) inputs (No. 7, 8) (see
the “
MP-01 Installation Manual ” for details);
11...14 - 4 optional analogue output
minus (-) poles .
Pin 123456789101191011
Label + + + + + +
A
V
B
mA
A
V
B
mA
+ + + +
Function AI1 AI2 AI3 AI4 AI5 AI6 Univ. AI1 Univ. AI2 AO1 AO2 AO3 AO4
Signal IN IN IN IN IN IN IN IN OUT OUT OUT OUT
Analogue input (mA, V) Analogue input (±mA, ±V) Analogue ouput (±mA, ±V)
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Name - - - - - -
P b
com
P b
com
- - - -
Function AI1 AI2 AI3 AI4 AI5 AI6 Univ. AI1 Univ. AI2 AO1 AO2 AO3 AO4
Signal IN IN IN IN IN IN IN IN OUT OUT OUT OUT
Analogue input (mA, V) Analogue input (±mA, ±V) Analogue ouput (±mA, ±V)

ascon S2 Series Specifications

General

Brand	ascon
Model	S2 Series
Category	Controller
Language	English