ascon S2 Series - Page 38

Sigmadue - microPAC MP-01 - User manual
30
5-1-4 Configuring OpenPCS
In order to work with the Ascon CPU target, you must install in OpenPCS a cab
file. The file Ascon_sigmadue_zzzz.cab contains all the files describing Ascon
sigmadue Hardware, drivers, examples and utilities (zzzz are digits to identify the
year of the software release).
In the OpenPCS “ Extras ” menu, select “ tools – Driver install… ”. “ Select ” the
desired cabinet (e.g. Ascon_sigmadue_2009.cab), then “
Install ”.
Figure 5.1 - OpenPCS OEM Driver Installation
5-2 OpenPCS Setup
To connect the OpenPCS development system to the Ascon target, a new
connection must be defined.
Select “
Connections... ” item in the “ PLC ” menu. In the window of OpenPCS
Connection Setup
select “ New ”.
Now in the window “
Edit connection ” it is possible to set the new connection. In
the field “
Name ” you can name the new connection.
By pushing the “
Select ” button you can pick the driver that manages the
communication with the target: for Ascon CPU is TCP52.
Figure 5.2 - OpenPCS Connection Setup