35
Chapter 7
CPU I/O Data
The sigmadue microPAC MP-01 unit, has several onboard I/O points that can be
easily accessed by the memory map area. The memory area is divided into
different sections:
Caution
Please check the MP-01 order code to verify the available options in your device.
7-1 Central Unit Data
7-1-1 Digital Inputs Data
7-1-2 Analogue Input Value
The first 6 High Level Analogue Inputs are always present on the device. The
inputs configuration is performed using the CPU Setup Menu (see Chapter 3 for
details). The value present in the memory map is expressed in engineering format
(V or mA), using the floating point 32 bit format.
Central Unit
Digital Input Status
Analogue Input Value
I/O Diagnostic Status
Onboard Temperature Values
Digital Counters
Digital Output Status
Analogue Output Value
Expansion Unit
Expansion Units I/O Diagnostic Status
Expansion Units Digital Input Status
Expansion Units Digital Output Status
Addr Size [byte] Format Data
%I100 1 BYTE Digital Inputs
Addr Size [byte] Format Data
%I112 4 REAL AI High Level CH1
%I116 4 REAL AI High Level CH2
To Next Page
Loading...
