Sigmadue - microPAC MP-01 - User manual
50
9-3 I/O Characteristics
Notes: 1. All the available input types are listed at:
“Setup the Selected AI High Level Channel”
on page 20 and
“Setup the Selected AI Universal Channel”
on page 21.
2. All the available output types are listed at:
“Local AO Ch Setup Menu”
on page 24.
Features Description
Digital Inputs
Input power supply 24Vdc (ON 5...30V, OFF 0...3V)
Max. input frequency 80Hz (ON/OFF limit)
Type Sink
Isolation
800V channels-power supply
800V channels-logic components
Protection Reverse polarity, overvoltage
Status indicator LED
Compliance IEC/EN 61131-2 (type 1)
Digital Outputs
Output power supply 24Vdc
Output current (nominal) 0.5A
Type Source
Protection Overvoltage/short circuit
Isolation 800V channels-power suply
Analogue Inputs
1... 6
Configurable: 0...10V, 0...1V, 1...5V, 0...5V, 0...20mA,
4...20mA
Input inpedance >100kΩ (V); <300Ω (mA)
7... 8 (option) [note 1]
Configurable: the 2 input channels can be configure as:
•Universal;
• High level input.
Input inpedance >10MΩ
Resolution 16 bit
Accuracy ±1%
Isolation
800V channels-power supply
800V channels-logic components
Analogue Output
1... 4 [note 2] Configurable: ±10V, ±20mA
Resolution 13 bit
To Next Page
Loading...
