AC08 and AC12 Operations Manual....
32
CONVERTER OUTPUT VOLTAGE CONTROL
Vout = XXX.X Line-to-XXXXXXX
XXXV Exit More Less
7.4 CONVERTER OUTPUT VOLTAGE CONTROL
Press the CONVERTER POWER + F1 buttons to access the CONVERTER OUTPUT VOLTAGE
CONTROL display.
This function allows the user to increase or decrease the converter output voltage (Vout). Press the
More (F1) button to increase the Vout, the Less (F2) button to decrease the Vout, the XXXV
(SHORE POWER) button to return Vout to the factory programmed setting, and the Exit
(SYSTEM STATUS) button to save the setting and exit.
Default Range Increments
Vout factory prog. voltage +/-5% 0.5 volts
Application: if the line-drop losses in a yacht are such that locations remote of the converter and
Ship's Bus experience undesirable, lower-than-expected voltages, the programmed Vout can be
raised up to 5% via this function. Also, to decrease total power usage, the Vout could be reduced up
to 5%. The new, programmed Vout will be used as the basis for AGC and all other voltage
dependent functions.
To Next Page
Loading...
