ASEA AC08 - Event Log

AC08 and AC12 Operations Manual....
33
EVENT LOG CONTROL
XXX Events Logged
View Track Exit Edit Erase
XXX:XX:XX:XX:XX ****START_LOG****
XXX:XX:XX:XX:XX Event_1 HIGH
XXX:XX:XX:XX:XX Event_2 LOW
Event Viewer Exit Next Previous
XXX:XX:XX:XX:XX Event_1 HIGH
XXX:XX:XX:XX:XX Event_2 HIGH
XXX:XX:XX:XX:XX Event_3 LOW
XXX:XX:XX:XX:XX Event_Next HIGH
7.5 EVENT LOG
Press the SHORE POWER + SYSTEM STATUS buttons to access the EVENT LOG CONTROL
display.
i
This is for monitoring internal converter logic operation. Press the Erase (F2) button while in the
above screen to erase all events. Press the Exit (SYSTEM STATUS) button to exit.
Press the View (SHORE POWER) button (while in the EVENT LOG CONTROL display) to
access the EVENT LOG VIEWER display.
This is for reviewing all past events (1000 max.) since the log was last cleared. Press the Next (F1)
button to scroll down (newer events). Press the Previous (F2) button to scroll up (older events).
Press the Exit (SYSTEM STATUS) button to exit to the EVENT LOG CONTROL display, and
again to exit completely.
Press the Track (CONVERTER POWER) button (while in the EVENT LOG CONTROL display)
to access the EVENT LOG TRACKER display.
This is for reviewing events as they occur. Press the SYSTEM STATUS button to exit.