Asiga MAX - Install Composer Software; To Install Composer

To Next Page

To Previous Page

Asiga MAX User Guide

By default, the printer will create a wireless network with the name set to the printer's name

and the password will be randomly generated. You can select Network Name or Password

to change them.

The printer will have an IP address of 172.27.10.1 with subnet mask 255.255.255.0. It will

also act as a DHCP server and assign IP addresses in the range 172.27.10.2-

172.27.10.254 to wireless devices that connect to it. The IP address and subnet mask of

the printer cannot be changed when using Wireless Direct.

Install Composer Software

Build jobs for the MAX are prepared on a personal computer using Asiga Composer™

software. Asiga Composer™ software is provided on the USB stick included with your MAX

or can be downloaded from the Asiga website. Asiga Composer™ runs on Windows, Mac

and Linux.

To install Composer:

1. Insert the USB stick into a USB port of your computer.

2. Browse to the folder “Composer Software”.

3. Double click on the installation file:

a. For Windows click “composer-XXXX-win32.exe” or “composer-XXXX-

win64.exe” depending on whether your operating system is 32-bit or 64-bit

respectively.

b. For Mac click “composer-XXXX-x86_64.dmg”

c. For Linux click