Asko TD60 - Technical Specifications; Components and Measurement Values

Servicemanual TD60
29
Components and measurement values TD60
Item number Component Measurement value Comments
80 618 24 Motor 50 Hz,
220/240 V
Main winding: 23.8 Ω
Auxiliary winding: 28.1 Ω
Current: 1.1 A; 270 W; 2850
rpm
80 618 95 Motor 60 Hz,
220/240 V
Winding resistance:
cable colour grey-blue 25.5 Ω
cable colour grey-red 16.0 Ω
Current: 0.9 A; 200 W; 3300
rpm
The motor is a 2-pin motor and is directly con-
nected to the fan for internal air and gearing for
driving the cylinder. The fan for external air is also
driven on condenser dryers.
73 829 92 Capacitor 6 μF The capacitor is mounted on the motor.
80 546 40 Capacitor 4 μF
88 011 94 Condensing waterpump 25W 111 Ω
80 762 02 EMC filter with inductor The filter eliminates interference to and from the
machine.
80 762 24 Thermistor 4 – 6 kΩ (at room tempera-
ture 20 – 30°C)
The thermistor controls temperature regulation.
If the thermistor is short-circuited or detaches
from the control unit, the program is cancelled.
80 792 91 Thermistor 8 - 12 kΩ (at room tempera-
ture 20 – 30°C)
80 773 85 Thermostat/Overheating
protection
(150°C automatic)
The thermostat
/overheating protection interrupts the program
at too high temperatures.
80 792 00 Thermostat/Overheating
protection
(135°C automatic)
80 761 04 Door switch The front door affects a door switch, which inter-
rupts the program when the door is opened. If
the door has been opened and closed during the
program the machine must be restarted using the
start/stop button.
80 761 03 Microswitch float If both containers are overfilled the program is
interrupted by a float switch located on the lower
holder. Overfilling is indicated in the display.
Electrical connection The machine is delivered as single phase and can
be switched between 1950 W, 10 A and 2500
W, 16 A.
Adjustment between 1950 W / 10 A and 2500
W / 16 A is carried out using software via but-
tons.
88 013 27 Control Unit compl. TD60.3 The control unit contains microprocessors for
controlling programs, motor, element etc.
8080604 Control Unit
8079287 Heating Element 2500W Heater 1: 1950W, 24,5Ω
Heater 2: 550W, 91,4Ω
8079288 Heating element 3000W Heater 1: 1950W, 24,5Ω
Heater 2: 1050W, 45,3Ω