Asko TD60 - Service Menu TD60.3; Entering and Navigating TD60.3 Service Menu

Servicemanual TD60
18
Program selector
1
2
2
Start Stop
3
1. Press the program selector button to scroll between the various service menus.
2. Turn the program selector button to make a selection between the menus. Confirm the selection and go to the
next menu by pressing the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.
Service menu TD60.3
This is how to enter the service menu
+
If the machine is on: First turn off the power at the main power switch. Press and hold the Program Selector while
turning on the main power switch.
x 3
Press the program selector button 3 times within 5 seconds. You are now in the service menu. See instructions
below for navigating the service menu.
Program selector (integrated machines)
1
2
2
Start Stop
3
1. Press the program selector button to scroll between the various options.
2. Press the small arrows to make a selection between the options. Confirm the selection and go to the next option
by pressing the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.