16
Delayed Egress
Installation Instructions
ED4000, ED5000 Series Exit Device
FM209 10/20
Copyright © 2006, 2010, 2018, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
13 ElectroLynx Wiring Deed with M91 Latchbolt Monitor Option and QC12 Hinge
QC12 Hinge - Field Wiring Options
Wiring to 8-pin and 4-pin
connectors is REQUIRED (12 wires
max).
• If external DPS wiring is NOT
REQUIRED, set PCBA Dip
Switch S2-7 ON.
• If external DPS wiring is
REQUIRED, set PCBA Dip
Switch S2-7 OFF.
Mechanical Trim
To Next Page
Loading...
