Asus SABERTOOTH 990FX R3.0 User Manual

3-14
Chapter 3: BIOS Setup
Chapter 3
The following items appear only when you set CPU & NB Voltage to [Manual Mode].
CPU Manual Voltage [Auto]
This item allows you to set a xed CPU voltage. Use the <+> or <-> to adjust the value.
The values range from 0.006250V to 2.075000V with an interval of 0.06250V.
CPU/NB Manual Voltage [Auto]
This item allows you to set a xed CPU/NB voltage. Use the <+> or <-> to adjust the
value. The values range from 0.500000V to 1.900000V with an interval of 0.06250V.
CPU VDDA Voltage [Auto]
Allows you to set the CPU VDDA voltage. Use the <+> or <-> to adjust the value. The values
range from 2.200000V to 2.800000V with a 0.006250V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. Use the <+> or <-> to adjust the value. The values
range from 1.200000V to 2.200000V with a 0.006250V interval.
NB Voltage [Auto]
Allows you to set the Northbridge voltage. Use the <+> or <-> to adjust the value. The values
range from 0.860000V to 2.135000V with a 0.005000V interval.
NB HT Voltage [Auto]
Allows you to set the Northbridge HyperTransport voltage. Use the <+> or <-> to adjust the
value. The values range from 1.200000V to 1.400000V with a 0.006250V interval.
NB 1.8V Voltage [Auto]
Allows you to set the NB 1.8V voltage. Use the <+> or <-> to adjust the value. The values
range from 1.801800V to 2.805000V with a 0.006600V interval.

Asus SABERTOOTH 990FX R3.0 Specifications

General

Chipset	AMD 990FX/SB950
CPU Support	AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series Processors
CPU Socket Type	AM3+
Storage	6 x SATA 6Gb/s
SATA RAID	RAID 0, 1, 5, 10
Audio	Realtek ALC1150 8-Channel High Definition Audio CODEC
LAN	Intel I211-AT, 1 x Gigabit LAN Controller(s)
Form Factor	ATX
Dimensions	12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
Memory Support	4 x DIMM, Max. 32GB, DDR3 1866/1600/1333/1066 MHz, ECC, Non-ECC, Un-buffered Memory
Expansion Slots	1 x PCIe 2.0 x1 1 x PCI
USB Ports	12 x USB 2.0 (6 at back panel, 6 at mid-board)
Power Pin	24-pin ATX Power Connector, 8-pin ATX 12V Power Connector
Multi-GPU Support	Supports NVIDIA Quad-GPU SLI and AMD Quad-GPU CrossFireX Technology