Administering the MERLIN Identifier Database
Searching for Specific
Database Records
To search for a record containing a specific string of characters in
the caller name, follow the instructions below:
1.
2.
3.
Enter the administration password.
Enter
S
(for
Search).
NOTE:
The search starts from the current record. If you want to
search the entire database, enter
F
(for
First)
before
entering the Search command.
Enter the string of characters to search for.
The MERLIN Identifier system displays a record with a caller
name containing the search string entered.
Repeating the Last Search
Searches may not always display the caller record you want.
To repeat the search using the same string of characters defined
in the last search:
■
Enter R (for Re-search).
The MERLIN Identifier system displays the next record
with a caller name containing the search string entered.
Setting Up and Maintaining the Database
39
To Next Page
Loading...
