22
Display Parameter Available Selections
dEC.P
Decimal point position
see note 1
0 to 3 - Use the or to set the ‘resolution’ with the
location of the decimal point for linear inputs
0 to 1 - Use the or to set the ‘resolution’ with the
location of the decimal point for thermocouple or RTD input.
d.FIL
Filtering
0. 1 - Use the or to set any ltering delays between 0.1
and 10 seconds.
Unit
Units - see note 2
F - Use the or to select Fahrenheit scale
C - Use the or to select Celsius scale.
CAY - Use the or to select the Kelvin scale.
bLAn
Blanking
OFF Use the or to set time, between 0.1 and 9999 seconds
before the setpoint display turns off.
dSPL
dEC.P
rt.d
dEC.P
Unit
To Next Page
Loading...
Need help?
General