Atlas Copco MT Focus 6000 Configuration Manual

Settings EN MT Focus 6000
12
© Atlas Copco Industrial Technique AB - 9839 0527 01
Description
ToolsNet configuration Settings to configure ToolsNet.
Digital I/O Displays the status and functions of the digital I/O con-
nections. It is also possible to test the digital outputs.
Select source Select source between controller, protocol/TT MT, dig-
ital I/O and scanner.
Third party licensing Licenses from third party.
Log out Logs out user, only available if a user is logged in.
Control window (Licensed feature)
Settings to view and edit the transducer and verifica-
tion configurations.
Verification data (Licensed feature)
Show detailed information about the verification.
The QA controller can get verification data either
through a station barcode or USB Sync.
Logging in and out of the controller
There are different ways to log in and out of the controller:
■
Enter a PIN code to log in when a padlock symbol is displayed.
■
Scan a barcode or rfid tag. One scan of the tag to login, scan one more time to log out.
■
Log out by pushing the OK button.
Login/Reboot menu
Hold the OK button to open the Login/Reboot menu. The following options are available:
Station barcode
Trigger station barcode on controller display.
Controller can only generate strings that are alpha numeric (0–9, A–Z (upper-case only), space, $, %,
*, +, -, ., /, :)
Log in
Log in user by entering a PIN code.
Select source
Change active select source:
■
Controller
■
Protocol/TTMT
■
Digital I/O
■
Scanner
■
Fieldbus
Standby
Set controller in standby mode.
Reboot
Reboot controller.

Atlas Copco MT Focus 6000 Specifications

General

Brand	Atlas Copco
Model	MT Focus 6000
Category	Controller
Language	English