Atlas Copco MT Focus 6000 Configuration Manual

Settings EN MT Focus 6000
8
© Atlas Copco Industrial Technique AB - 9839 0527 01
Settings
Results
When a tightening is performed, the results are stored on the controller. Results can also be sent to an ex-
ternal system such as ToolsTalk and ToolsNet. The results can also be exported by using an USB flash
drive.
Result view
The result view menu shows live results from the latest tightening.
A Result view.
B Tightening status indicator.
C Number and name of active Pset/Batch sequence.
D Final torque.
Set in ToolsTalk MT Pset > General settings > Report.
E Final angle.
Set in ToolsTalk MT Pset > General settings > Report.
Step results
The step results menu shows live results from the latest tightening. It can show the following information:
■
Step number and result:
■
Grey - not executed
■
Green - OK
■
Red - failed.
■
Peak torque for each step.
■
Angle for each step.
■
Time for each step.
■
Max. peak torque of the tightening.
■
Total angle.
■
Total time.

Atlas Copco MT Focus 6000 Specifications

General

Brand	Atlas Copco
Model	MT Focus 6000
Category	Controller
Language	English