Atlas Copco MT Focus 6000 - Connectors

Configuration overview EN MT Focus 6000
6
© Atlas Copco Industrial Technique AB - 9839 0527 01
Connectors
The following external connections are possible:
■
Digital I/O device:
A 24V digital I/O device can be connected through Digital I/O port.
■
Scanner:
■
A USB HID, such as keyboard, can be connected through USB Host port.
■
An RS232 scanner can be connected through COM port.
The USB-scanners must have:
■
USB HID interface (Keyboard)
■
English-US keyboard interface
■
Vacuum pump:
A vacuum can be connected through VP port.
■
Single USB flash drive:
A USB flash drive can be inserted into the USB Host port.
■
USB hub: