- 49 -
Grease coupling head, towbar bearings at the housing of
the overrun brake
xxx
Check brake system (if installed) and adjust if necessary x x x
Oil or grease brake lever and moving parts such as bolts
and joints
xxx
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection
device for damage
xx
Lubricate torsion bar axle trailing arm xx
Check brake lining wear x
Change wheel hub bearing grease x
Critical bolt connections
(14)
Lifting beam to frame xx
Horizontal lifting beam to vertical lifting beam xx
Coupling housing alternator to flywheel housing engine x
Rotor disk alternator to flywheel engine x
Engine to engine support (included with engine) x
Engine support to vibration damper engine xx
Vibration damper engine to frame x
Alternator support to vibration damper alternator xx
Vibration damper alternator to frame x
Maintenance schedule Daily
50 hrs
after initial
start-up
Every 500
hours
Every 1000
hours
Every 2000
hours
Yearly
Service pak - - 2912 4546 05 1636 3103 37 1636 3103 38 -
To Next Page
Loading...
Need help?
General
