ATN CX 12 User Manual

OPERATOR AND SAFETY MANUAL
1NO0031EN-08
CX 12 - CX 15
54
8.4. ACCESSING THE IQAN "DEFAULT VALUES" PAGE
The values displayed in the "default values" page vary from machine to machine.
To apply the factory settings, it is important to refer to the "default values" page to apply the
respective values to each machine.
1st step:
On the home page, press [F1] to access the "Motor/Transmission" page.
2nd step:
On the "Motor/Transmission" page, press [F1] then validate the code to access the
"Revision/Auto-diagnostic" page.
3rd step:
On the "Revision/Auto-diagnostic" page, press [F1] to access the "Revision" page.

ATN CX 12 Specifications

General

Brand	ATN
Model	CX 12
Category	Scissor Lifts
Language	English