Atronic Harmony - GAMEPLAY; MONEY IN

10
February 2006
Harmony™ Operating Manual
MONEY IN
Depending on hardware configuration, the machine
accepts coins/token and bills. Additionally the machine
is prepared for Ticketing (optional) and Wagering
Account Transfers (optional), and supports Remote
Key In function.
Coin In
Atronic Harmony™ machines accept one specific type
of coin or token, which was determined by customer
specification. Coin in mechanics, coin acceptor and
hopper are customized to this specific coin size and
weight to provide highest performance, reliability and
security.
Bill In
Atronic Harmony™ machines utilize JCM™ WBA/UBA-
type bill acceptors to provide highest acceptance rates
and best reliability. The decal below the bill in, will
specify accepted currency and bill values. Acceptance
of each bill type can be enabled/disabled seperately.
Voucher In (optional)
Optionally the machine supports voucher redemption
and issue (ticket in / ticket out) using enhanced or
system validation. Connection to a fibre optic network
requires an optional Atronic fibre optic kit.
Cashless / Smart Card (optional)
The wagering account transfer (WAT) function allows
cashless transfers from/to a casino managed wagering
account by means of an external cashless wagering
system. Card handling is managed by an (optional)
player interface.
Support of WAT functionality is application- and
software-dependent.
Note:
In order to allow voucher
redemption, an optional ticket
in dongle (obtainable from
Atronic) has to be installed.
GAMEPLAY
Note:
Customized machines may use
a different hardware setup
other than described.
Note:
In order to allow cashless
transfers using player cards,
an optional player interface /
card terminal has to be
installed.