FMB10 User’s Manual Edition 06/2005
___________________________________________ Page 48 _____________________________________________
Audemat-Aztec SA – Audemat-Aztec INC
WEB: www.audemat-aztec.com - e-mail: contact@audemat-aztec.com
ASCII instruction syntax
ASCII instruction description
FMB10 Encoder
Example(s) and comments
TA=0
o
TA=1
TA : indicator for the presence of traffic
information during broadcasting.
(Traffic Announcement).
The value of the TA parameter is not written
into permanent memory as it corresponds to
an obligatory momentary event (few seconds,
or a few minutes)
IMPORTANT:
The TA parameter may also be
set at TA=1by an external switch connected to
one of the 2 logic inputs of the FMB10
encoder. For all the connection details, refer to
the paragraph "Remote control of the TA code
by external switch".
See also
: TP=
Mode ASCII : the TA parameter
can be reread with the command
TA?
TEXT=
x1x2x3... x64
PS_TEXT=
x1x2x3…x64
This command sets up a text (up to 64
characters) for broadcasting in Radio Text
format.
If not all the 64 characters are used, the
FMB10 encoder automatically adds spaces at
the end of the entered text string.
See also
: RT_RATE=, RT=
This command sets up a text (up to 64
characters) for Broadcasting in PS
format(no added spaces).
ASCII mode : the TEXT
parameter may be reread with
the command TEXT?
▲ IMPORTANT:
text is not
saved
TP=0
or
TP=1
b=0 or b=1
TP : indicator for the possibility of traffic
information by the TA code.
(Traffic Program).
TP=0 signifies that the station does not intend
to activate the TA parameter for the
broadcasting of traffic information.
See also
: TA=
ASCII mode : the TP parameter
can be reread with the command
TP?
VER
Returns the version of the RDS encoder
internal software.
To Next Page
Loading...