Audemat-Aztec FMB10 - Rear Panel

FMB10 User’s Manual Edition 06/2005
___________________________________________ Page 7 _____________________________________________
Audemat-Aztec SA – Audemat-Aztec INC
WEB: www.audemat-aztec.com - e-mail: contact@audemat-aztec.com
Green Led "STATUS 2" :
Fully off or fully on: The CPU of the RDS encoder is not running, or is running incorrectly.
1 flash per second: Code PI1 or NPROG1 (programme codes n°1) being broadcast.
2 flashes per second: Code PI2 or NPROG2 (programme codes n°2) being broadcast.
More than 4 flashes per second: Code TA activated to 1, being broadcast.
2.4.
Rear panel
¾ IEC connector
: main power switchable from 230 to 115 VAC
¾ SUB-D type 9 pin female
: COM0 RS-232 port
¾ BNC : OUT
= RDS or MPX output signal
¾ BNC : SYNC/MPX IN
= synchronisation input and/or composite ‘multiplex’ signal input
1
1
2
2
3
3
4