Light s and Vi s ion
Turn signal and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher .
®
,
I
@
Fig. 34 Turn signal and high beam lever
Turn signal s ¢i Q
N
0
0
>
u.
a,
The turn signals activa t e when you move the lev-
er into a turn signal position when the ignition is
switched on.
(D- Right tu rn signa l
@ - Left turn signal
The turn signal blinks three times if you just tap
the lever.
High beams and headlight flash er ~D
Move the lever to the corresponding position:
@ - High beams on (vehicles with high beam as-
sistant* ¢
page 44)
© - High beams off or headlight flasher
The
ii indicator light in the instrument cluster
turns on .
A WARNING
High beams can cause glare for other drivers,
wh ich increases the risk of an accident . For
this reason, only use the high beams or the
head light flasher when they will not create
glare fo r other d rivers.
44
High beam assistant
Appli es t o: vehicles wit h high beam assistant
The high beam assistant automatically turns the
high beams on or off depending on the surround-
ing conditions .
A camera on the rearv iew mirror mou nt can de-
tect light sources from other road users . The high
beams switch on or off automatically depend ing
on the pos it ion of vehicles d riving ahead and on-
com ing vehicles , the veh icle speed and other en-
vironmental and traffic cond it ions.
Activating high beam assistant
Requirement: the light sw itch must be set to the
AUTO pos it ion and the high beam ass istant must
be switched o n in the Infota inment system
¢ page 45.
"' To act ivate the high beam ass istant, tap the
lever forward @ ~
page 44, fig . 34 . The Iii in-
dicator light appears in the inst rument cluste r
disp lay and t he high beams a re swit ched on/off
automa t ically. If t he high beams we re com-
pletely or pa rtially switched on, the
IIJ indica-
tor light turns on.
Switching the high beams on/ off manually
If the high beams d id not switch on/off automat-
ically as expected, yo u may switch them on or off
manua lly ins t ead :
"' To switch the high beams on manually, tap the
lever fo rward @ ~
page 44, fig. 34. The ii in-
dicator light turns on.
"'To switch the high beams off man ua lly, pull the
lever back © ¢
page 44, fig. 34 . The high beam
assistant is deactivat ed.
Operating the headlight flasher
"' To operate the headlig ht flasher when t he high
beam ass istant is activated and hig h beams are
switched off, pull the lever back © ¢
page 44,
fig. 34 .
The high beam assistant remains ac-
tive.
Messages in the instrument cluster display
m;J Audi adaptiv e light : malfun ction! See own-
er's manual
To Next Page
