Copyright © 2006-2009 AudioNote Kits
www.AudioNoteKits.com
audionotekits@rogers.com
Page 42
Where the orange wire (from FIL_DC)
connects to the ECF80 board you
need to add another orange wire to
connect over to the FIL on the other
ECF80 board.
To summarize:
The orange wire from FIL_DC connects over to the first
ECF80 board and then continues on through a second
orange wire over to the second ECF80 board – meanwhile
the red/black twisted wires from the hardwire boards are
soldered into the FIL FIL holes on each ECF80 driver
board.
To Next Page
Loading...
