10% of the selected fixed input range when the bargraph
HOLDRANGE function is used) the display will show the word ‘Low’,
and there will be no phase reading. If the S/N ratio in either channel is
less than 40 dB, the reading may be unstable, especially at low
frequencies.
& For more
information on
HOLDRANGE, see page
4-58.
4 Operation
Operation Controlling the Analyzer : Phase
4-42 Portable One Plus Access User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
