AudioCodes MediaPack MP-108 User Manual

MediaPack SIP
MediaPack SIP User’s Manual 56 Document #: LTRT-65405
5.5.1.2 Proxy & Registration Parameters
Use this screen to configure parameters that are associated with Proxy and Registration.
¾ To configure the Proxy & Registration parameters, take these 4 steps:
1. Open the ‘Proxy & Registration’ parameters screen (Protocol Management menu >
Protocol Definition submenu > Proxy & Registration option); the ‘Proxy & Registration’
parameters screen is displayed.
Figure
5-4: Proxy & Registration Parameters Screen
2. Configure the Proxy & Registration parameters according to Table
5-2.
3. Click the Submit button to save your changes, or click the Register or Un-Register buttons
to save your changes and to register / unregister to a Proxy / Registrar.
4. To save the changes so they are available after a power fail, refer to Section
5.9 on page
161.

AudioCodes MediaPack MP-108 Specifications

General

Brand	AudioCodes
Model	MediaPack MP-108
Category	Gateway
Language	English