AUMA SAV Series - 2 Identification; Name Plate

To Next Page

To Previous Page

2. Identification

2.1. Name plate

Figure 1: Arrangement of name plates

[1] Actuator name plate

[2] Actuator controls name plate

[3] Motor name plate

[4] Additional plate, e.g. KKS plate (Power Plant Classification System)

Actuator name plate

Figure 2: Actuator name plate (example)

(= manufacturer logo); (= CE mark)

[1] Name of manufacturer

[2] Address of manufacturer

[3] Type designation

[4] Order number

[5] Serial number

[6] Speed range

[7] Torque range in direction CLOSE

[8] Torque range in direction OPEN

[9] Type of lubricant

[10] Permissible ambient temperature

[11] Can be assigned as an option upon customer request

[12] Enclosure protection

[13] Data Matrix code

SAV 07.2 – SAV 16.2 / SARV 07.2 – SARV 16.2 Control unit: electronic (MWG)

ACV 01.2 Modbus TCP/IP Identification

Other manuals for AUMA SAV Series