AUMA SQ 12.2 - Commissioning Optional Equipment; EWG 01.1 Electronic Position Transmitter

68 pages

To Next Page

To Previous Page

15. Certificates

15.1. Declaration of Incorporation and EC Declaration of Conformity

SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2

Certificates AMB 01.1

Main Page

Table of Contents2
Safety Instructions5
Basic Information on Safety5
Range of Application5
Applications in Ex Zone 22 (Option)6
Warnings and Notes6
References and Symbols7
Identification8
Name Plate8
Short Description10
Transport, Storage and Packaging11
Transport11
Storage11
Packaging11
Assembly12
Mounting Position12
Handwheel Fitting12
Actuator: Mount to Valve12
Valve Attachment Via Coupling13
Mounting Positions of Local Controls14
Mounting Positions: Modify14
Electrical Connection16
Basic Information16
Connection with AUMA Plug/Socket Connector17
Terminal Compartment: Open17
Cable Connection18
Terminal Compartment: Close19
Accessories for Electrical Connection19
Parking Frame19
Protection Cover20
Double Sealed Intermediate Frame20
External Earth Connection20
Operation21
Manual Operation21
Manual Operation: Engage21
Manual Operation: Disengage21
Motor Operation21
Local Operation21
Actuator Operation from Remote22
Indications23
Indication Lights23
Mechanical Position Indicator/Running Indication23
Signals24
Feedback Signals (Binary)24
Feedback Signals (Analogue)24
Commissioning (Basic Settings)25
End Stops in Part-Turn Actuator25
End Stop CLOSED: Set26
End Stop OPEN: Set26
Switch Compartment: Open27
Torque Switching: Set27
Limit Switching: Set28
End Position CLOSED (Black Section): Set29
End Position OPEN (White Section): Set29
Intermediate Positions: Set29
Running Direction CLOSE (Black Section): Set30
Running Direction OPEN (White Section): Set30
Test Run31
Direction of Rotation: Check31
Limit Switching: Check31
Electronic Position Transmitter EWG 01.132
Measuring Range: Set33
Current Values: Adjust34
LED End Position Signalling: Switch On/Off34
Potentiometer34
Potentiometer Setting35
Electronic Position Transmitter RWG35
Measuring Range: Set36
Mechanical Position Indicator: Set36
Switch Compartment: Close37
Commissioning Controls Settings38
Local Controls: Remove38
Type of Seating: Set38
Push-To-Run Operation or Self-Retaining: Set39
Push-To-Run Operation or Self-Retaining for Operation Commands Via Push Buttons39
Push-To-Run Operation or Self-Retaining for Operation Commands from Remote39
Local Controls: Mount40
Controls: Open41
Feedback Signals Setting Via Output Contacts41
EMERGENCY Command (EMERGENCY - OPEN/EMERGENCY - CLOSE): Set42
Controls: Close43
Corrective Action45
Faults During Commissioning45
Fuses45
Fuses Within the Actuator Controls45
Motor Protection (Thermal Monitoring)47
Servicing and Maintenance48
Preventive Measures for Servicing and Safe Operation48
Maintenance48
Disposal and Recycling48
Technical Data50
Technical Data Part-Turn Actuator50
Technical Data Actuator Controls53
Spare Parts56
Part-Turn Actuators SQ56
Sq 14.2/Sqr 05.256
Actuator Controls AUMA MATIC BASIC AMB 01.1/AMB58
Certificates60
Declaration of Incorporation and EC Declaration of Conformity60
Index63
Addresses65

AUMA SQ 12.2 - Commissioning Optional Equipment; EWG 01.1 Electronic Position Transmitter

Table of Contents

Other manuals for AUMA SQ 12.2

Related product manuals