Description of actuator controls name plate
Figure 3: Actuator controls name plate
[1] Type designation
[2] Order number
[3] Serial number
[4] Actuator terminal plan
[5] Actuator controls terminal plan
[6] Mains voltage
[7] AUMA power class for switchgear
[8] Permissible ambient temperature
[9] Enclosure protection
[10] Control
[11] Data Matrix code
Descriptions
Type designation Figure 4: Type designation (example)
1. Type and size of actuator
2. Flange size
Type and size
These instructions apply to the following devices types and sizes:
SQ 05.2, 07.2, 10.2, 12.2, 14.2 = part-turn actuators for open-close duty
SQR 05.2, 07.2, 10.2, 12.2, 14.2 = part-turn actuators for modulating duty
AMB 01.1 = AUMA MATIC BASIC actuator controls
Order number
The product can be identified using this number and the technical data as well as
order-related data pertaining to the device can be compiled.
Please always state this number for any product inquiries.
On the Internet at http://www.auma.com, we offer a service allowing authorised
users to download order-related documents such as wiring diagrams and technical
data (both in German and English), inspection certificates and the operation
instructions when entering the order number.
Actuator serial number
Table 1: Description of serial number (with example)
NS123451405
1
st
+ 2
nd
position: Assembly in week
Week 0505
3
rd
+ 4
th
position:Year of manufacture
Year of manufacture: 201414
All other positions
Internal number for unambiguous product identificationNS12345
9
SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2
AMB 01.1 Identification
To Next Page
Loading...
