AutomationDirect DL105 - Page 16

xi
Table of Contents
DL105 PLC User Manual, 3rd Edition
Communications Problems 8--7..........................................................
I/O Point Troubleshooting 8--8............................................................
Noise Troubleshooting 8--10...............................................................
Machine Startup and Program Troubleshooting 8--11........................................
Appendix A: Auxiliary Functions
Introduction A--2.........................................................................
Purpose of Auxiliary Functions A--2......................................................
Accessing AUX Functions via DirectSOFT A--3............................................
Accessing AUX Functions via the Handheld Programmer A--3...............................
AUX 2* — RLL Operations A--4............................................................
AUX 21 Check Program A--4............................................................
AUX 22 Change Reference A--4.........................................................
AUX 23 Clear Ladder Range A--4........................................................
AUX 24 Clear Ladders A--4.............................................................
AUX 3* — V-memory Operations A--4......................................................
AUX 31 Clear V--Memory A--4...........................................................
AUX 4* — I/O Configuration A--4..........................................................
AUX 41 Show I/O Configuration A--4.....................................................
AUX 5* — CPU Configuration A--5.........................................................
AUX 51 Modify Program Name A--5......................................................
AUX 53 Display Scan Time A--5.........................................................
AUX 54 Initialize Scratchpad A--5........................................................
AUX 55 Set Watchdog Timer A--5........................................................
AUX 57 Set Retentive Ranges A--5......................................................
AUX 58 Test Operations A--6............................................................
AUX 5B Counter Interface Configuration A--6..............................................
AUX 6* — Handheld Programmer Configuration A--6.......................................
AUX 61 Show Revision Numbers A--6....................................................
AUX 62 Beeper On / Off A--6............................................................
AUX 65 Run Self Diagnostics A--6.......................................................
AUX 7* — EEPROM Operations A--7.......................................................
Transferrable Memory Areas A--7........................................................
AUX 71 CPU to HPP EEPROM A--7.....................................................
AUX 72 HPP EEPROM to CPU A--7.....................................................
AUX 73 Compare HPP EEPROM to CPU A--7.............................................
AUX 74 HPP EEPROM Blank Check A--7.................................................
AUX 75 Erase HPP EEPROM A--7.......................................................
AUX 76 Show EEPROM Type A--7.......................................................
AUX 8* — Password Operations A--8......................................................
AUX 81 Modify Password A--8..........................................................
AUX 82 Unlock CPU A--8...............................................................
AUX 83 Lock CPU A--8.................................................................